3D Lens in a Cap 9005 Specifications contact - shop - home

3D Lens in a Cap 9005 - APS-C - product photograph

3D Lens in a Cap 9005 - APS-C

3D Lens in a Cap 9005 - APS-C - product photograph

3D Lens in a Cap 9005 - APS-C

LOREO 3D Lens in a Cap 9005 - APS-C - sample photograph

sample photograph

LOREO 3D Lens in a Cap 9005 - APS-C - sample photograph

sample photograph

LOREO 3D Lens in a Cap 9005 - APS-C - sample photograph

sample photograph

LOREO 3D Lens in a Cap 9005 - APS-C - Specifications

Lens Type: 3D, parallel view
Lens system: 40 mm, f11-22, 2 element, plastic polymer composite
Sensor Format:
 APS-C format subframe digital SLR sensor - ~ (22 - 24) x (14.5 - 16) mm
Diaphragm: Twin Blade, f11, f16, f22 with click stops
Focus adjustment: Focusing slider continuous from 1.5m to infinity.
Focusing range: 1.5m to infinity.
Accessory Lens: 58mm filter thread. Maximum outer diameter 86 mm. Minimum rear lens diameter 44mm. Suitable for wide angle and tele converters.
Special Feature:
 Gives an APS-C format subframe digital SLR camera 3D capabilities using normal processing. Retains many of the features of an SLR camera, such as through the lens viewing, auto exposure, TTL flash. Focus coupled Parallax Compensation. Parallax feedback focus aid.
Stereo Base: 90 mm (distance between the two light paths)
Digital SLR body mounts: 2nd generation Loreo SLR mounts available for Canon EOS, Nikon F, Minolta AF / Sony Alpha, Samsung GX / Pentax K. For Olympus / Panasonic Four Thirds and Micro Four Thirds format version please visit the 3D Lens in a Cap 9005 - 4:3 Specifications page.
Digital SLR compatibility: Canon EOS D30, D60, 10D, 20D, 30D, 40D, 50D, Rebel 300D, 350D, 400D, 450D, 500D, 550D 1000D, 7D (Canon EOS mount) - Most Canon SLR cameras work with the Loreo 3D lenses in auto-metering mode, but exposure bias should be set to -1.5 or -2. The 300D has flash exposure bias disabled, but it is known that people have found ways to re-enable it.

Nikon D1, D1X, D1H, D2H, D2X, D100, D200, D300, D2H, D40, D40X, D50, D60, D70, D70s, D80, D90, D300, D3000, D3100, D5000, D7000 (Nikon mount) - Nikon digital SLRs work with Loreo 3D lenses in manual mode. In most Nikon digital SLRs, over-exposure is shown on the LCD screen after a picture has been taken. This function can be used in place of auto-metering.

Pentax *ist D, *ist DS, DS2, DL, DL2, K-x, K2000, K-7, K-m (Pentax K) are compatible.
Pentax K100D, K110D and K200D are not compatible because they have a large flash housing which does not fit the 9005 lens. The K10D and K20D are a tight fit. The Samsung GX10 also has a large flash housing, and does not fit the 9005A.
- most Pentax SLR cameras work with Loreo Lens in a Cap products in auto-metering mode.

Fuji Finepix S1 Pro, S2 Pro, S3 Pro, S5 Pro (Nikon mount)- Fuji digital SLRs work with the Nikon mount Loreo 3D lenses in manual mode.

Minolta Maxxum 5D, 7D (Minolta AF mount) - require shutter lock to be disabled. Minolta digital SLRs work with Loreo 3D lenses in automatic metering mode. When set to "P", the exposure compensation needs to be set to -1.5 stops. When set to "A" (aperture control), exposure compensation does not need to change. The anti-shake feature improves lighting conditions by 1-2 stops.

Sony Alpha DSLR-A100 and A700 (Minolta AF mount) - require the shutter lock to be disabled. These cameras were developed jointly with Minolta. The Sony Alpha Lens mount is compatible with Minolta AF lenses. Loreo subframe 3D Lenses are known to work with these cameras. The Alpha A100 and A700 work with Loreo lenses in automatic mode. The anti-shake feature improves lighting conditions by 1-2 stops. The A33, A55, A200, A230, A300, A330, A350, A500, A550, A850, A900 (Minolta AF mount) do not have a separate feature to disable the shutter lock. The camera has to be put into manual focus mode (MF).

Samsung GX-1S (Pentax K mount, untested)

Dimensions
(APS-C):
 Measured head on facing the lens: W = 165mm, H = 73mm, L = 65mm (including mount)
Body:
 Lightweight silver-grey plastic body. Fibre reinforced chassis. Hand made. Manual lens, all mechanical parts, no electronics.
Weight
(APS-C) 		170g
Retail Price:
 TBA
Available for purchase:
 TBA

- - - - -

3D Lens in a Cap 9005 - APS-C (LA9005A) Box Set Packing List

  • 3D Lens in a Cap 9005 - APS-C (Model LA9005A)
  • 2 Lens Covers for the front
  • Lens bag with drawstring (provisional)
  • Operation Manual
  • Giftbox for 3D Lens in a Cap 9005 - APS-C
  • Lite 3D Viewer
  • Pixi 3D Viewer
  • Deluxe 3D Viewer (Optional)

- - - - -

Return to the Loreo Homepage.

E-mail: info@loreo.com
Copyright (C) Loreo Asia Ltd. All rights reserved. All rights reserved.